Click here for Product Archive
Deceuninck
has introduced two new hollow soffit boards to its Deeplas range of building
product solutions. The 300mm and 400mm boards are manufactured directly
by Deceuninck and offer a quality finish with an overall depth dimension
of 10mm, some 2mm thicker than standard boards.
The 300mm and 400mm boards are available in both vented and plain options,
a good solution for any roof installation. The new boards interlock simply
and effectively with Deeplas’ existing 100mm soffit board which helps
installers cover large areas quickly and neatly.
The new soffits are available from stock in a full range of foils including
Golden Oak, Mahogany, Rosewood and Black finish.
Contact: Martin Vowden,
Tel: 01249 816969
Email: mailto:martin.vowden@deceuninck.com
Web: http://www.deceuninck.com
Eurocell
Launches New 18mm Ogee Euroboard
Eurocell
Building Plastics of Alfreton, Derbyshire has
recently launched a new extension to its product range. The 18mm Ogee
Euroboard will complement the existing Euroboard options. Available initially
in white only, the new product has been developed through installer demand
to meet the growing needs of existing and potential customer requirements.
Eurocell Building Plastics offers both the new-build and replacement markets
a comprehensive range of PVCu building products. The product range includes
Eurocell Building Plastics Roofline fascias, soffits together with window
cills, boards, trims, cladding, silicone sealants, guttering and tools
as well as Eurocell Building Plastics Pinnacle traditional and modular
conservatory roofing systems. All Eurocell Building Plastics roofline
and cladding products have BBA approval and are manufactured in accordance
with ISO 9002.
Tel: 01773 842 100
Email: mailto:marketing@eurocell.co.uk
Web: http://www.eurocell.co.uk
New
Sentinel Thermoguard Door Features Improved Fire and Security Performance
Sentinel
Doors
has introduced a second generation Thermoguard Series 900 Fire Door that
the company says significantly improves on the fire and security performance
of the previous model.
The new door, which is being produced in volume in a dedicated new production
facility, is designed specifically to meet the changing needs of RSLs
and local authorities. It achieves a 30 minute fire rating whilst meeting
the same industry standards (Secured by Design, PAS23 and 24), finish
and appearance as Sentinel's composite doors.
Features of the construction of the new door include a solid, edge-bound
core, smoke seals, improved hinges and locks giving greater security performance,
and door skins produced in Sentinel's new SMC material.
Thermoguard doors are manufactured by bonding pre-formed fire retardant
skins to a fire resistant core, to create a featured door leaf. Like all
Sentinel doors, fire doors are virtually maintenance-free with good sound
and thermal insulation properties.
Thermoguard doors are available in 44mm format, pre-installed within a
hardwood outer frame to form a fire door set that is factory finished
and ready for installation. The range is suitable for front and rear door
installations.
The new range is available in 900, 901, 903, 904 and 907 door styles and
in white, solid colours and woodgrain finishes. The doors are glazed with
Pilkington Pyroshield glass, and are mechanically fixed using glazing
frames that are completely air and watertight. They also offer defence
against attempted forced entry. Other glass options are available if required,
as is a choice of hardware.
Contact: Phil Mundell
Tel: 01443 229219
Windowscreens
UK Introduces new Fly Screen Doors
Essex
based Windowscreens UK has introduced
a new Flyscreen Doors line. All doors have 40mm (1-5/8") wide aluminium
framing. Hinged flyscreens for entry and French doors include hidden,
interior steel 'L' corners. All products are available in white and brown.
Super-tough polyester mesh is now an available option on all door and
window flyscreens for the first time. Flyscreens provide an additional
growing revenue opportunity in all glazing situations, especially conservatories.
According to M. Green, Sales Manager for Windowscreens UK, all products
are exclusive to Windowscreens UK with delivery available within the UK
and Eire.
Further details, plus a new catalogue download feature, are available
on the fully-priced Windowscreens UK website at: http://www.flyscreensuk.co.uk
Popular
Pilkington Pyrostop Broadens Appeal
Pilkington
Building Products-UK
says it has extended the boundaries of glass technology with the 23mm
addition to its specialist fire-resistant glass range.
The company has developed 23mm Pilkington Pyrostop, an integrity and insulation
glass, which has passed rigorous fire tests easily meeting the British
standards, in all the most popular UK formats. A full suite of user-friendly
fire tests substantiate the product.
With more and more regulations placed on building products to comply with
tightening legislation and designs, the new thicker 23mm Pilkington Pyrostop
allows for larger glass walls to be constructed whilst retaining its superior
fire resistant performance.
The new product has been successfully tested for 60 minutes integrity
and 60 minutes insulation in the following systems:
- Multi-pane hardwood screen. Glass size 1510 x 2910mm. (RF03058)
- Multi-pane steel screen with slimline mullions. Glass size 1500 x 2765mm
(WARRES 127055)
- Multi-pane mild steel screen. Glass size 1495 x 2895 mm (WFRC C129365)
- IGU incorporating low emissivity coating on Pilkington Optilam and Pilkington
T glass (WARRES 131563)
Pilkington Insulight incorporating 2 x 23mm Pilkington Pyrostop has also
been successfully tested for 120 minutes integrity and insulation in the
following format.
- Multi-pane steel screen. Glass size 1415 x 2400 mm (WARRES 117011)
Further testing is in progress to demonstrate the superior performance
of the Pilkington Pyrostop range. Excellent results for Pilkington Insulight
incorporating Luxaclair blinds will shortly be announced.
The 23mm Pilkington Pyrostop product replaces the 21mm Pilkington Pyrostop
product. A full set of fire test summaries can be obtained by calling
the Pilkington Helpline on 01744 692000.
Web: http://www.pilkington.com
Elumatec’s
New Cutting and Machining Centre Designed and Built for the UK
Elumatec's
engineers have again listened to their British customers and produced
a top specification cutting and machining centre specifically for the
UK market. The Elumatec SBZ615 is unique to Britain and incorporates a
number of functions and features that are designed for profiles and frame
types indigenous to the local market.
This machine will simultaneously cut and machine profiles with the processes
dealt with in a logical flow that best suits British fabrication practices.
Elumatec says that the SBZ615 is up to 60% faster than more conventional
equipment, and is able to produce around 800 frames per week in a single
shift system, dependent upon style and fittings.
However, although the cutting and machining centre has a huge specification
and performance that is built with Elumatec's engineering quality, it
remains competitive in price to bring the highest levels of automated
processing within the reach of small and large fabricators alike.
Phil Heavey, Managing Director of Elumatec UK says that the machine is
one of the most efficient ever created for the UK market: ‘We discovered
a recurrent theme when talking to our customers, both existing and potential,
in that the existing solutions available to them were expensive and often
quite slow. We spoke to our engineers and they set about creating what
we believe is an ideal solution for British frame cutting and machining
needs.’
Contact:
Phil Heavey
Tel: 01908 580800
Web: http://www.elumatec.com
Groupco
has added the fully upgraded PN UNI Side Swing system to its range of
hardware. Developed specifically for the UK market by Peder Nielsen, the
Side Swing option is currently only marketed in this country by Groupco.
The hardware has been enhanced to deliver even higher performance and
to satisfy the latest regulations relating to emergency egress.
PN
UNI Side Swing hardware is now manufactured from Austenetic Stainless
Steel to BS/EN ISO 9001 for long lasting durability, and features extruded
aluminium powder coated tracks for smooth movement. The fittings are designed
for window sash widths from 500mm to 1100mm.
The new Side Swing hardware offers a suitable solution for a wide range
of applications. It features a reverse catch for safe and easy cleaning
from the inside. The re-design also satisfies current fire egress regulations
and incorporates automatically engaging restrictors. A built-in anti-lift
feature within bottom glider ensures additional security.
Easy to fabricate and install, the PN UNI Side Swing system requires no
routering of the frame or sash. Groupco offers full training and technical
support on this product and has its own Approved Fabricator Scheme.
PN UNI Side Swing hardware forms part of the PN UNI System, which includes
fittings for top swing, projecting top hung, projecting side hung and
side hung window styles. The universal groove fixing is suitable for use
with PVCu, aluminium, timber and composite profile. And because PN UNI
System hardware is designed to ensure a consistent appearance for all
window styles the Side Swing option can be used alongside Topswing or
other UNI gearing on the same development without compromising the overall
look of the windows.
PN UNI Side Swing hardware has been designed to satisfy the specific demands
of the UK market and Groupco believes there is no comparable window hardware
available. ‘We’ve built a strong partnership with PN and are
very impressed with the quality and performance of the company’s
product range. The upgrades for the Side Swing option means it meets all
safety and security requirements and can be specified with confidence
for a variety of demanding applications, from schools and hospitals to
high rise residential and commercial buildings,’ comments Richard
Duncan, Managing Director of Groupco.
Tel: 01733 234750
Web: http://www.groupcoltd.co.uk
Latest
Rapid Processing Centre Raises the Volume
Exclusive
to Promac, the latest incarnation
of the Rapid Optima VIA MFC 6500 is capable of processing high volumes
while retaining production flexibility, via short cycle times and profile
independency.
By
separating the sawing unit and processing module, productivity is increased
considerably and this is further aided by the inclusion ofa buffer station
between the two modules. This modular construction is traditionally the
key feature ofthe Optima processing centre and allows the unit to be adapted
with feeding assemblies, flexible transport axles, buffer runs and cross
belts to accommodate production space requirements.
The MFC 6500 M-module provides selective machining operations including
drainage, espag routing, night vents, door lock preparation and transom
milling. The multi-axis rail head can be indivIdually fitted with assemblies
and tools ensuring a wide variety of processing options. Support plates,
which can be positioned independently, permit parallel processes. To further
increase speed of processing on the new MFC 6500, the Y-axis travel has
been increased to 220mm which enables letter plate and night vent cut
out operations to be achieved in one pass.
Three 500mm diameter saw blades on the MFC 6500 enable the cutting unit
to perform 90 and 45 degree V-notching with an extra two 300mm diameter
blades providing peak and bevel cutting. Servo axles provide feed and
advance motions on the sawing unit increasing cutting speed and quality.
The machine also benefits from a new suite of software.
Tel: 01788 577577
Email: mailto:saleswin@promac.co.uk
Web: http://www.promac.co.uk
Handling
large, ungainly welded cills for conservatories and bays can be fraught
with problems. Welded cills are impossible to adjust if measurements are
out of tolerance and securing large flexible cills during transit presents
a further potential headache. Now, Midland’s based extrusion specialist,
Euroseal, has developed a range of
connectors which allow its 70mm cill to be quickly and effectively joined
on site, leaving a neat, professional finish.
The new connectors are designed to be self-locating within the cill chambers,
leaving just a chamfered, colour matched trim on view. The three designs
of cill connector allow cills to be straight-jointed, joined at 90¼ and
135¼ and are available in light brown, dark brown and white. These colours
are designed to complement the Euroseal 70mm cill, which is available
in three foiled finishes, mahogany, rosewood and light oak as well as
four shades of white. The new connectors and all finishes of 70mm cill
are now available, ex-stock from Euroseal.
Contact: Chris Byers
Tel: 0121 344 4100
Email: mailto:chris@euroseal.co.uk
Web: http://www.euroseal.co.uk
The
Easy Frame range from manufacturer of modular conservatories, the BHD
Group, is specifically designed to provide home improvement
companies with a faster and easier alternative to the traditionally complex
process of buying in roof systems and then making and bolting together
windows to provide customers with conservatories.
‘Speed and ease of installation is where 'easyframe' really scores.
The connector system allows conservatories to be constructed onto a pre-prepared
base in just one day. This means less disruption for the homeowner, but
also has a significant impact on an installer's productivity. Installing
an 'easyframe' conservatory is significantly faster, which means installers
can fit more, so in turn sell more and ultimately be more profitable.’
says the company.
Home improvement companies can choose from the concise 'easyframe' range
of 18 conservatories featuring three of the best selling styles: Victorian,
Edwardian and Lean-to in the three most popular sizes. The range includes
the option to choose glass to ground or glass to 600mm dwarf wall panels.
This range of 18 products covers an estimated 95% of the market requirement.
'Faced with increasing employment costs and skill shortages, many forward
thinking home improvement companies are choosing to focus their attention
on selling and installing conservatories, rather than bringing together
a hybrid product. This is even more important as consumers increasingly
demand independent product accreditation for peace of mind - something
that 'easyframe' customers can offer with the 10-year manufacturer's guarantee.'
says the company.
'Market research confirms continued strong growth in the conservatory
market, particularly at the lowest price spectrum where in 2004 some 65,000
conservatories will be sold. By choosing 'easyframe', home improvement
companies can offer consumers an integrated solution. Able to source the
complete product from one supplier, the world of conservatories will open
up to allow more consumers than ever before to enjoy the benefits of owning
a conservatory.
'Home improvement companies that choose the 'easy-frame' solution benefit
directly from a reduction in manufacturing labour costs, but also reap
the rewards of being able to offer customers a concise range of conservatories
that represents value for money.'
Tel: 01922 749755
Web: http://www.bhdconservatories.co.uk
Exclusive
Diamond Suite from Laird
Design
is one of the major features of the Diamond suite of door furniture launched
by Laird Security Hardware. The combination
of a new shape and geometric handle design reflects a modern style that
is functional and beautifully engineered. Lever and matching pad versions
are available, both ergonomically designed with a contemporary styled
back-plate that features smooth radiused edges.
A wide selection of finishes in anodised gold and silver is available
together with white and matt black. Now, demands by installers’ customers
for handles that complement white or woodgrain finishes can be met as
can the need for handles that harmonise with the increasingly popular
coloured profiles now being fabricated. Durability is assured with all
components; including the powder coated, quality aluminium handle and
back-plate; corrosion protected to the relevant British Standard.
Suitable for most PVCu, aluminium or timber doors, the Diamond suite of
handles is designed for 92mm European lock centres and will match most
multipoint locks currently available when fitted with a Euro-cylinder.
Testing of the new Diamond handle furniture has been in excess of 100,000
cycles and subjected to operating tests derived from PAS-23. A ten year
guarantee is provided reinforced by the Saracen Guarantee Scheme for authorised
Saracen installers.
The latest Diamond handle suite available from Laird Security Hardware
enhances a successful range of window and door hardware including hinges,
locks and ultra high security door locking systems designed to meet relevant
British Standards and licensed by Secure by Design.
Contact:: Richard Sheppard
Tel: 01376 507505
Email: mailto:richard.sheppard@lairdsecurity.co.uk
Liability
Fears Eased with New Winlock Restrictor
New
Regulations written into BS 8213 are now stipulating that in certain circumstances,
such as hospitals, restrictors must be fitted to windows. With recent
court cases ruling that architects, owners of public buildings and even
installers can be liable for people falling out of windows, the warnings
for the industry are stark.
The
spotlight on safety and quality issues in the window industry has never
been as intense. Against this backdrop Winlock
Security has launched a new initial opening restrictor, called
the BoaRestrictor.
Designed to exceed the updated BS8213, BS6375 and BS7412 safety standards,
the BoaRestrictor offers a new design. BoaRestrictor restricts initial
opening to 100mm requiring two-handed operation to avoid accidental disengaging
and automatically re-engages when the sash closes.
BoaRestrictor has been rigorously tested to 600NM of performance loading.
Safety and ease of fitment are two of the key design elements of this
new British-made restrictor, which reduces dangers from unprotected windows.
Further safety features include the fact that the restrictor is supplied
as non-key locking and features green button enhancement for fire egress.
Fabricators should welcome the BoaRestrictor’s ability to fit in
line with friction stays and save costs by incorporating run-up blocks.
The BoaRestrictor is easy and quick to fit, fully concealed and can be
retro-fitted. Convenient 13mm and 17mm stack heights are provided to suit
fabricators’ systems.
Contact: Philip Swann
Tel: 01952 680178
Email: mailto:sales@winlock.uk.com
In
response to customer demand, the Briwax Professional
range has been expanded to include Fine Line pens for minor repairs on
wood grain foils.
'These
new pens perfectly complement the existing range of lacquer pens,' explained
Product Manager, Stuart Jack. 'The lacquer pens were designed for finishing
foiled corners during production but we realised that they are also being
widely used by installers for minor on-site repairs. In fact, the lacquer
pen tip is too big for delicate repair work but as the name suggests,
Fine Line pens have a much smaller nib which makes it easier to simulate
the graining.'
About the same size as an ordinary biro, Fine Line pens are less bulky
and very easy to carry around in a pocket. They are available in mahogany
base, mahogany grain and oak/cherry.
In addition to pens, the Briwax Professional range includes a comprehensive
selection of products. It is both effective and easy to use and includes
special items for PVCu - offering 10 different shades of white - and is
also suitable for repairs to solid wood.
Training
Seminars are available throughout the year with each session providing
a broad introduction to repairs on all types of surfaces including PVCu,
solid wood, veneers, painted finishes and foils. They are an excellent
foundation for anyone new to the Briwax Professional system.
Located at the company's new Tamworth training centre, there are two types
of seminar - PVCu and Furniture. Both courses run from 09.00 to 16.30hrs
and cost £lOO for the first person and £75 for each additional
attendee. A light lunch is included.
Tel: 0845 601 2905
Email: mailto:sales@bollom.com
Web: http://www.bollom.com/briwaxprofessional