Click here for Product Archive
New
Sundyal™ Roof Extends Choice for Homeowners
Conservatory
roof specialist Wendland Roof Solutions
has developed a roof product that aims to bridge the gap between a conservatory
and a built extension - Sundyal™.
A new product for the UK market, Sundyal™ is an affordable, solid
roof system that aims to combine the thermal insulation properties of
a built extension with the light, airy feel of a conservatory. The result
is a ‘sun room’ which brings the home and garden together and
can be used comfortably all year round. The roof has been designed to
complement the exterior style of any UK home - it is externally clad in
a selection of tile finishes, including Burnt Umber, Antique Red and Charcoal.
Sundyal™ represents an exterior style match for any home.
This sense of style and practicality has also been extended to the internal
design of the roof. Sundyal™ can be clad internally with everything
from timber tongue and groove boards to PVC cladding in a range of colours
and finishes. However, the most popular choice is expected to be a plastered
finish that can include downlighters for a modern look that will match
the interior of many UK homes. In addition to these aesthetic benefits,
Sundyal™ offers practical advantages over a standard conservatory
roof system. Because the roof system is solid rather than glass or polycarbonate,
it offers homeowners both greater privacy and better thermal efficiency,
producing a sun room that is bright yet comfortable. The insulation properties
of the roof allow the room to remain cooler than a typical conservatory
in hot weather, yet also retain warmth during colder months. A Sundyal™
sun room also represents a far more cost effective alternative to a built
extension, with the average house extension now costing homeowners in
excess of £20,000. Customers will save money on heating bills as
well as initial construction costs.
For installers, Sundyal™ is a good addition to an existing range
of conservatory products, representing an added value sales opportunity.
The product is easy and quick to fit and can easily be assimilated into
an existing conservatory installation set-up.
Wendland’s Managing Director Graham Fisher anticipates wide interest
in the product:
‘Sundyal™ really is a revolutionary roof system. It will fill
the gap that currently exists in the market between the choice of a conservatory
or a house extension and open up even greater opportunities in this market
for installers. We have already received incredibly positive and enthusiastic
feedback from some of our existing installers who have previewed Sundyal™
and want to include it in their portfolios as soon as possible. It’s
a product that we believe will sell itself – it looks fantastic,
can be fitted easily and offers excellent thermal performance.’
Web:
http://www.wendland.uk.com
A
new system specifically for low pitched conservatories is being launched
by Aztec Conservatory Roof Systems.
Specially
designed self-supporting steel glazing bars provide structural integrity,
while minimising intrusion into the ‘room’ below with a maximum
depth below 35mm glazing of less than 30mm. Purpose-formed structured
polycarbonate ‘clip fixes’ and interlocks into the steel bars.
The polycarbonate sheet and bridging clip combine to form a weathertight
seal and joint locked into the steel support.
The special design of the polycarbonate and its fixing method means that
externally, any abutments are almost invisible, creating a clean, unbroken
eyeline across the roof. Internally, Aztec has developed a bespoke white
PVC trim which simply clips over the steel support to provide a clean,
aesthetically pleasing internal finish.
The system is engineered to create a self-supporting structure capable
of spanning up to 12m lengths with a pitch as low as 3°. Each component
is supplied cut to size as required.
A choice of glazing options from 16mm- 40mm, in clear, opal and bronze,
is available, ensuring optimum compliance with Building Regulations, fire
resistance and insulation criteria and flexibility to accommodate individual
customer demands.
The multiwall polycarbonate is Class 1 surface spead of flame rated, and
provides a maximum U value of 1.4W/m2K.
‘The result is a strong system with ‘invisible’ glazing
fixing, giving the appearance of an unbroken span of polycarbonate,’
explains Aztec managing director Colin Bennett.
‘It is ideal for low pitches, because of the invisibility of the
fixing and glazing system, and the inherent strength of the steel supports,
which ensure the system will withstand the greatest possible wind and
snow loadings to which it may be subjected in this country, even when
fixed almost flat!’
Tel: 01942 720044
Email: mailto:enquiries@aztecsystems.co.uk
The
Elumatec SBZ608 Allows Maximum Flexibility for Greater Production
Elumatec,
the manufacturer of window fabrication machinery, has introduced a new
model designed specifically in response to the needs of its UK customers.
The SBZ608 is an advanced CNC machining centre designed to work in tandem
with an existing front end saw or cutting centre, allowing fabricators
to maximise production capacity.
Many
UK fabricators currently use several front-end machines such as double
mitre saws or other CNC models for speed and efficiency, only to be slowed
down by machining processes like drilling and routing. The Elumatec SBZ608
has been designed to complement the front-end saw, performing all profile
routing and drilling requirements automatically. Data is programmed through
the unit’s dedicated processor via disk or network and can be viewed
on a colour TFT screen.
After cutting, profile pieces are placed onto an in-feed automatic loading
station. The loading magazine can support up to 10 profile bars or rest
pieces measuring up to 4.0 metres in length. A barcode scanner identifies
the processing that needs to be completed on each piece. Practically all
preparations are then handled by the SBZ608, including those for water
slot routing, hardware fixing and Door preparations. The centre is also
able to process sections containing reinforcement, such as for hardware
location and transom hole drilling, including screwing of these sections.
Demonstrating the attention to detail that is applied to the design of
any Elumatec machine, up to 30 tools may be stored in the routing and
drilling station of the SBZ608, enabling it to cope with varying profile
types without manual tool changes.
Attention has also been paid to handling and clamping systems to ensure
precision and high performance.
The Elumatec SBZ608 is quite simply the definitive solution to a common
‘bottleneck’ problem, offering levels of versatility, speed
and accuracy that are not available from any other single, integrated
unit. ‘When measured against competitive stand-alone units, the SBZ608
offers exceptional value for money with a superior return on investment.’
says the company.
Caption: The Elumatec SBZ608 has been designed to complement the front-end
saw, performing all profile routing and drilling requirements automatically.
Contact:
Phil Heavey
Tel: 01908 580800
Web: http://www.elumatec.com
New
Multi-Function Electric Locks from Abloy®
Abloy
Security
has launched a new range of patented Euro profile electro-mechanical locks
that enable stockists to reduce the cost and complexity of stocking multiple
lockcase types, while helping installers cut the time required for both
specification and installation. The new, modular range of lockcases will
reduce stockholding throughout the delivery chain by up to 90%, with specification
being dramatically simplified to just eight basic criteria.
In addition, the electro-mechanical DIN locks have been designed and manufactured
to meet the latest EN standards relating to emergency and panic exit doors,
plus resistance to fire: EN179, EN1125 and EN1634-1 respectively. The
range has also been tested for conformity to draft standards for burglary
(prEN1627) and mechanical resistance (prEN12209-1).
As well as improving upon the current range of options available, the
new multi-function locks now provide the majority of them within one single
lockcase. Functions such as choice of handing; voltage selection;
power status (fail locked/unlocked); bolt throw; and hardware compatibility,
traditionally determined at specification stage, can now be selected and
easily set, during installation.
Incorporating new, patented technology, the lockcases now offer even higher
security and safety. A new trigger bolt function prevents false triggering
and will deadlock only when the door closes. The new locks also offer
the most comprehensive selection of monitoring status indication of any
electric lock currently available, making connection to access control,
exit and fire systems even easier.
Further developments have been made in terms of user convenience, with
the motor locks now taking only 0.7 seconds to open. In addition,
the new range of lockcases are compatible with most types of architectural
hardware.
Julie Day, Marketing Manager at Abloy Security explains that, 'The new
Abloy Euro DIN electro-mechanical locks have been developed in order to
meet customer needs and to conform to the latest EN standards. We
wanted to make it easier to specify the correct product and offer stockists
and installers a much smaller range of products to help them control costs
without sacrificing product quality or performance'.
Glaverbel
Launches Planibel G fasT
In response to the growing demand for hard-coated glass, Glaverbel has introduced Planibel G FasT. In addition to Planibel G, this low emissivity, hard-coat (pyrolytic) glass can be toughened quickly in any furnace.
Planibel G fasT differs from Planibel G in that it has an additional special
surface treatment that allows it to be toughened with the coated face
in contact with the rollers; coated face down - without any damage to
the coating such as scratches and marks. This feature changes the physical
principles of toughening, balances out the quantity of energy absorbed
by the two glass surfaces and keeps the glass perfectly flat without any
other form of external intervention. 'Thus, Planibel G fasT is the only
Low E glass in the world that can be toughened in any furnace, including
radiation furnaces. As most of the toughening furnaces in the United Kingdom
are radiation furnaces, processors are understandably excited about an
easy to handle glass that can be toughened with no investment in new equipment.'
says the company.
Another benefit confirmed by tests carried out by Glaverbel*, is the reduction
in toughening cycle times. Here too, processors will appreciate an innovation
resulting in increased efficiency and speed, substantial energy savings
and reduced costs.
Toughened and annealed** Planibel G and G fasT can be combined on the
same façade (for residential and commercial applications) depending
on the level of safety required. In addition to having the same neutral
appearance, the two products have the same properties, including double
glazing units with increased thermal insulation, high light transmission
and low reflection. Planibel G fasT can also be assembled into laminated
glass for increased safety, or even combined with solar control glass.
For further information about Planibel G fasT, please visit http://www.myglaverbel.com
* Internal and external tests
** Annealed glass: glass that has been subjected to controlled cooling
to reduce the presence of residual stress in the glass thus allowing easy
cutting. It includes float glass, sheet glass, patterned glass and wired
glass and is independent of float glass composition.
New
DuPont Interlayers Enable Digitally Printed White Designs in Laminated
Glass
DuPont
Glass Laminating Solutions
recently announced the industry's first PVB interlayers to enable white,
digitally printed images and design effects to be embedded securely inside
laminated safety glass. The advance is based on new white ink science
developed by DuPont for its SentryGlas® Expressions™ family of
decorative interlayers.
SentryGlas®
Expressions™ decorative interlayers combine ink jet and polymer sheet
technology from DuPont to enable fast, custom designs in laminated glass.
The technology is backed by DuPont ink jet formulating science, and the
company's recent polymer material innovations for the laminated glass
industry.
DuPont decorative glass venture manager David S. Cordrey explains, ‘The
ability to digitally print SentryGlas® Expressions™ interlayers
gives designers the freedom to create textures, images, wayfinding or
other visuals in safety glass. To launch the business, we adapted traditional
full-colour, high-resolution printing technology to work with selected
DuPont interlayers, resulting in decorative glass that meets established
building codes and safety requirements.’
Adds Cordrey: ‘In traditional color printing, the substrate, for
example paper, provides whiteness in the printed result. However, glass
interlayers are often clear, which means whiteness needs to be added,
to create white design elements. Adding white ink to the SentryGlas®
Expressions™ colour palette gives us that capability - advancing
design and production options for the decorative glass industry.’
Digitally printing white imagery onto the safety glass interlayer is a
precise, high resolution and easy way to customise glass and create unique
environments. Compared with screen printing, using SentryGlas® Expressions™
encourages more imaginative designs that are faster and easier to adjust.
The technology also enables interesting new visual options such as gradients
of colour-to-colour or colour-to-clear. And production is more environmentally
friendly than acid etching, often used for frosted whites.
With SentryGlas® Expressions™ interlayers, the resulting design
is embedded inside the glass, safely protected from cleaning chemicals,
abrasives, dirt and grease stains, or sources of marring or scratching.
DuPont™ SentryGlas® Expressions™ white ink technology is
suitable for decorative glass applications such as balustrades, space
dividers, privacy glazing, and light wells.
DuPont Glass Laminating Solutions says that it provides materials, services
and innovations for a better, safer world. The business operates within
the DuPont Packaging and Industrial Polymers strategic business unit,
part of DuPont's $5.3 billion Performance Materials growth platform.
Guyson
International
has released an all-new blast cabinet range that the company says combines
radical design and styling together with functional, operational and ergonomic
best practices. Coupled with Guyson’s 65 years of blast finishing
experience, the result is a new cabinet range that allows operators to
work in the most ergonomic method possible with the most productive tools
in a safe and clean work environment.
The new Tiger blast cabinet is designed around an optimum internal working
height, a vertical standing position and a new Guyson 500 gun with ergonomic
grip handle, resulting in a comfortable experience for the operator whether
they are working on the smallest or largest cabinet in the range. All
the new cabinets provide good operator visibility through a large viewing
window and shadow free lighting; large armholes with built-in arm supports
and a low profile moveable foot pedal permit long spells of fatigue free
working.
Further benefits are offered with a simplification of daily maintenance
tasks, enabled by quick release and quick change over of consumable products,
like anti-frosting sheets and air-filters. Making maintenance easier for
the operator helps him keep an optimally performing cabinet.
Four of the most popular sizes of suction feed cabinet are available now
and further cabinet sizes are being added to the range, along with pressure
fed versions. Initially previewed at MACH 2004, the cabinet range has
been generating a great deal of interest at a host of European shows where
it has been exhibited via the extensive Guyson distributor network.
Tel: 01756 799911
EKU
Divido - Room Partition System from Häfele UK
The
Divido room partition has been launched by Eku AG, the Swiss sliding door
gear specialist, and is available exclusively in the UK from Häfele.
The
Eku Divido is an easy to install, functional partition system for wooden
doors or a stylish combination of an aluminium frame profile and 6mm glass.
With this system, fixed and moving panels can easily be combined even
when the sliding door is installed under a sloping ceiling.
A top hung version for panels up to 100kgs each and a bottom rolling system
for 80kgs panels is available for both wood and glass doors. The glass
door version is supplied with a 30mm wide frame profile, in satin anodised
aluminium to create panels up to 1200 x 2750mm. A sub dividing bar can
also be used to add a timber or glass infill to give a truly distinctive
appearance to a room divider.
To complement the system Eku has also produced self adhesive flush pull
handles to match the glass door profile, this eliminates the need for
cut outs in the glass.
The bottom rolling Divido system can be used to create large walk in wardrobes
as well as room partitions, in areas with sloping ceilings to maximise
space that was previously wasted.
Eku is part of the Hawa group of companies which have been producing high
quality sliding hardware from Switzerland for decades, all products are
exclusively available from Häfele UK.
Web: http://www.hafele.co.uk
3D
House Added to Conservatory Software
Added
to the bespoke conservatory design facility, RoofWright’s
new Silver v 5.9 includes a House Designer to show customers exactly what
their windows will look like in 3D on their house. Window styles can be
selected from an extensive library, imported from other design files or
specially created onscreen using the Window Editor. All can be shown in
3D.
RoofWright
now combines window and conservatory design in one cost effective package
that will enhance the quality of sales presentations and create more opportunities
to add more value to each sale.
RoofWright is user friendly and easy to set up with unlimited design potential
using templates of the popular shapes and styles and the Bespoke Freehand
Designer. Print off all the sales paperwork you need from a choice of
Quotations, base plans and layouts with as many different views and dimensions
as you like and use the same data for pricing the job instantly. Once
you’ve clinched the deal, you can use the original design drawings
for the survey, adding notes as necessary (eg. Move man hole cover) and
for ordering the components. The same data can be used in RoofWright Gold
to fabricate the conservatory roof and can be exported to Business Micros
Winstar/Evolution for window fabrication.
RoofWright is under continuous development from which all customers benefit.
Telephone support and training is provided together with free upgrades
for all customers with an annual Maintenance & Support Contract which
is free in the first year.
For a free evaluation visit http://www.roofwright.com
or telephone 0161 426 1120
Summit
Window Boards and Trims
‘Window
installers looking for sensibly priced, high quality window boards need
look no further than Summit, one of the fastest growing cellular PVC trade
brands in the UK.’ says the company.
Available
from over 200 plastic building materials stockists throughout the UK,
Summit window boards can be supplied in various styles, including Bullnose
and Square Edged, in either 9mm or 16mm. The range can be supplied in
widths from 150mm to 405mm.
Popular profiles are also available in Mahogany, Light Oak, Rosewood and
Black, with associated trims, corners and joints foiled to match. This
ensures a professional finish to every installation.
‘Summit profiles will not crack, peel or warp and need very little
maintenance to keep looking good once fitted. Boards will not discolour
and come with a 10-year guarantee for appearance and performance. They
also have a BS Kitemark and Class 1 fire rating.’ says the company.
Tel: 08700 119752
New
High Security Easy Release Push Bar
The
new FAP8 push bar from panic exit device specialists JPM is now available
from Abloy Security. A new concept
in push bar design, FAP8 combines high level security with aesthetics
for a functional yet attractive modern look.
Suitable for all types of public buildings, such as office blocks, hospitals
and buildings used by both the young and elderly, FAP8 has been designed
entirely with safety in mind and can easily be installed on all types
of door including wooden, metal or PVC framed doors in both single and
double leaves.
FAP8 features a new roller and pin bolt design, that wraps around the
strike. This allows the door to be opened with less force, improving safety
and ease of operation. In addition, the new bolt design gives increased
resistance to break-in as it absorbs strain, resisting a pull force of
up to 980Kg from the outside.
Features:
* Fire rated 2 hours
* Low opening pressure
* Smooth and silent operation
* Increased break-in resistance
* Single, two point and three point versions available
Tel: 01923 255066
Email: mailto:marketing@abloysecurity.co.uk
New
SpeedTherm Fusing Kilns made by Bohle
Warm
glass processing traditionally belongs to the oldest and most creative
fields of activity which use glass as a material. For centuries, only
very few insiders were privy to the methods and rules of warm glass processing.
Today, this knowledge is available to everyone and belongs to the lesson
plan of every glass trade school.
In
this field, Bohle is known worldwide as a qualified, professional partner.
The topic of fusing has also taken a top position within Bohle’s
comprehensive range of seminars: there are six different fusing seminars
covering diverse aspects of fusing, each seminar being unique, yet tying
in well with the others. These are amongst the most popular seminars offered
by the company. Since the inception of these seminars five years ago,
several thousand international participants have attended them and furthered
their knowledge in this field at Bohle. Against this background and supported
by the company’s years of experience in the development and production
of high-quality glass processing machines, it is a logical step for Bohle
to now take the development and production of high-quality fusing kilns
into its own hands.
At Glasstec 2004, Bohle introduced
the SpeedTherm fusing kiln series for the first time. In all, five standard
model sizes are available to meet the diverse requirements of the customer.
All the models work with a rapid infrared heating system and have stainless
steel housing. The SpeedTherm kilns are controlled by maintenace-free,
durable and quiet semi-conductor controls. The handle of the lid extends
along the entire width of the kiln and is angled downward, making the
kiln operator-friendly and convenient for everyone. Since the handle is
also thermally uncoupled, the operator can comfortably open the kiln during
the firing process. A further advantage is the large storage space underneath
the kiln (from model size 100 and up). Here you’ll find a safe and
clearly laid out place to store many fusing materials and moulds. And
finally, especially worth mentioning are the built-in observation ports
at the sides of the kiln which allow the operator to view inside during
the firing cycle without having to open the kiln (from model size 100
and up).
SpeedTherm 220 and 150 will be available in the first quarter of 2005.
'Despite the many improvements now built into the range, the prices will
remain as attractive as the previous models, allowing a low-cost entry
into this ‘in vogue’ movement in glass in the UK.' says the
company.
Contact: Gary Dean
Tel: 0161 342 1100
Email: mailto:gdean@bohle.de
New
Schüco Window Range has Gaskets Pre-Inserted
Schüco
has introduced Corona+ a new range of quality PVCu profiles for windows
and doors that are supplied with all gaskets pre-inserted. ‘The result
is consistent product quality, reduced fabrication times and a greater
throughput of finished units.’ says the company.
The specially formulated gaskets have been designed with low sight lines
to enhance the appearance of the units without diminishing weldability
or weather performance characteristics. Each is purpose-designed for its
particular function (fixed glazing, fixed glazing and rebate seal, rebate
seal or glazing bead), thus ensuring optimum performance throughout the
lifetime of the window.
In addition to being able to offer customers a good-looking, hard-wearing
quality product, fabricators who switch to the Corona+ system will benefit
from needing to order fewer parts and having to provide less working and
storage space on the factory floor.
All Corona+ windows and doors are available in a 60mm or 70mm profile
and there is a full range of woodgrain finishes and colours.
The Schüco Corona+ window and door system has been tested and approved
by BSI and BBA and the pre-inserted gaskets meet all relevant standards
including BS 7412: 2002, clause 5.4.
Tel: 01908 289152
Web: http://www.schueco.co.uk
Ultraframe
has added two new traditional style luxury fans to its Senator range to
increase choice for consumers and sales opportunities for its customers.
The
company has also produced a glossy new brochure on its collection of fans
as part of its commitment to provide a growing range of marketing tools
for its customers.
The brochure, called Finishing Touches, shows the 3 ranges – President,
Senator and Consulate, available from Ultraframe. The two new fans, in
the Senator range, include a traditional white fan with a brass body and
white and rattan blades, and a traditional oak fan with polished brass
body and oak /rattan or mahogany /rattan blades.
Initial response to the new fans and the brochure has been encouraging.
Mark Hanson, Marketing Manager at Ultraframe, said: 'Our customers have
been very positive about our new products and the brochure. They like
the design and style of the leaflet and believe it will help them increase
their sales of fans and therefore profits.'
President
fans represent the ultimate range from Ultraframe and offers a choice
of four styles. Each fan incorporates patented quick fit technology, reducing
installation time to around 15 minutes. The fans are supplied with lights
and remote controls as standard and a light timer, allowing the consumer
to walk out of the conservatory in the light. A choice of blade colours
and light styles ensure all tastes are catered for, while the extended
three-year warranty provides additional peace of mind.
The Senator range has a choice of five stylish fans, which each incorporate
different light styles. The fans are supplied with a pull switch as standard
and can be upgraded with an optional remote control.
For those on a smaller budget the Consulate range includes two fans designed
to offer great value for money. Simply operated by a pull switch, both
fans are covered by Ultraframe’s standard two-year warranty. They
add a clean simple look to any conservatory.
All fans have a conservatory friendly drop-rod included.
The new fan brochure is designed to support Ultraframe’s commitment
to providing quality, innovation and service to all its partners. A price
list insert is available on request.
Web: http://www.ultraframe.co.uk
Shepley
Launches the Next Generation of Composite Doors
The
demand for composite doors is on the increase with market growth showing
a staggering increase of 171% from 1999 to 2004 compared to 23% for PVCu
doors. Sales of Shepley's new range
of composite doors were up 300% in just 6 weeks following its launch.
Composite
doors present a great opportunity for installers to sell the next generation
of residential doors. To make sure Shepley customers can profit from this
growth market the company has launched a completely re-engineered door
range with significant advances in strength, looks and styles.
Shepley's coloured and woodgrain composite features a protective skin
made from a modified polycarbonate blend, similar to material currently
used in helmet visors, police riot shields and machines. The skin offers
greater thermal and UV stability than either ABS or PVC, allowing the
door to outperform its competitors in terms of heat and impact resistance.
Shepley's composite door provides a heat distortion temperature of around
90oC, and allows Shepley to offer the option of mahogany, oak, rosewood
and black finishes, as well as lighter colours, safe in the knowledge
that it will not bow, warp or crack if temperatures soar. This is one
of the reasons why the door range comes with a full manufacturer-backed
10-year guarantee.
Another significant development is the weather resistant laminated veneer
lumber, making it one of the most impenetrable doors on the market. This
incredibly solid core has been tested and fully certified by the British
Board of Agrement, and is extremely secure, warp-free, weather and fire
resistant.
All doors are supplied unglazed with a cassette system providing the homeowner
with an endless choice of 28mm glass panels and removing the dangers of
pressed glazing. The latest addition to the collection is a new design
with the rustic charm of a tongue and groove finish. The range is available
in 8 finishes with a range of glass options designed to appeal to the
more traditional setting.An option to this design, the composite stable
door combines high performance with the versatility of a split panel.
Shepley offers a full 10-year guarantee to retailers and unusually the
composite door is available in standard 3-week turnaround. For sales aids
Shepley has developed a new consumer brochure designed to position and
help sell the door as a premium product, as well as a CDrom full of product
news, retail press release, promotional images and in-store POS.
Tel: 0161 339 2433
Web: http://www.shepley.com
TruSeal
Technologies Offers Setting Blocks for Improved Glass Support
TruSeal
Technologies, Inc.,
a world specialist in warm edge spacer systems for insulating glass (IG),
offers setting blocks to protect glass against vibration and shock from
handling, shipping and wind-loads. Available with and without pressure
sensitive adhesive (PSA), TruSeal’s setting blocks are designed to
elevate and isolate the IG units from the sash – reducing the risk
of breakage.
Setting blocks act as cushions to help support the glass. By elevating
the IG unit, the setting blocks help keep the edges from contacting any
water that may be trapped in the glazing pocket. The neoprene material
makes the blocks resilient, allowing the IG unit to handle stressed conditions.
Setting blocks with PSA are recommended for knock-on glazing application.
Other key features of TruSeal’s setting blocks, include:
• Good durability under installed conditions
• Excellent performance under high and low temperatures (-20² F –
170² F)
• Indefinite shelf life for non-adhesive units
• Availability in various thickness, widths and lengths
Email: mailto:kreider@truseal.com
Web: http://www.truseal.com
Conservatories
for all from Sierra
Sierra
Windows
has improved its conservatory package for installers. It can now supply
a conservatory to suit every property and every pocket by offering two
roofing systems. This gives customers an even more competitive edge in
the marketplace.
For standard conservatories Sierra now offers Uzone and Uzone Elevation,
while the Quantal roofing system, which is already available to customers,
is suitable for premium installations that require a higher specification
and greater flexibility.
‘The Conservatory Sales Coordination Team provides a quick, reliable
and accurate service and is highly rated by our customers. Dedicated staff,
experienced in all aspects of conservatory installation, will provide
drawings and a quotation within 24 hours, whatever the project.’
says the company.
Backed by high quality manufacturing facilities at its state-of-the-art
factory, Sierra offers a quick, reliable delivery anywhere in the UK.
The conservatory package includes frames, doors and ancillaries as well
as roofs.
Sierra Windows has almost 30 years experience in the industry. The company
manufactures over 4000 frames a week, and offers customer support and
marketing backup to help its customers grow their business.
Tel: 01803 697000
Web: http://www.sierra-windows.co.uk