Click here for Product Archive
TruSeal
Releases Second Product in New Insulating Glass Sealant Family
TruSeal
Technologies, Inc.,
flexible spacer systems for insulating glass (IG) specialist, has introduced
the second product in its new family of hot-melt butyl and polyisobutylene
(PIB) IG sealants. Named EdgeTherm™, the new product family features
high-performance, gun grade IG sealants for manufacturing flexibility.
The second rollout in the EdgeTherm line is PIB-H1, a high viscosity,
high strength, 100 percent solids sealant system. The product is based
on a PIB polymer formulated to impart reinforcement, resist degradation
from ultraviolet light and provide low moisture permeability. With its
high viscosity formula, PIB-H1 resists shearing in large, heavy lights
of glass and retains flexibility through a wide temperature range to compensate
for thermal movement of IG units.
EdgeTherm PIB-H1 is used as the primary seal on IG units while providing
the main moisture vapour seal between the glass and metal spacer. It must
be used with a secondary seal designed to provide structural strength.
The company says that the product's properties provide a low moisture
vapour transmission rate, consistent quality and good adhesion to glass
and metal through a wide temperature range. PIB-H1 also provides easy
application and handling of coated spacer bars and resists degradation
from ultraviolet light and oxidation.
Available in black, EdgeTherm PIB-H1 is provided in bulk for application
by various type extruders.
Web: http://www.truseal.com
The
potential to build conservatory roofs 'out ofline' is being explored with
the development of a new prototype roofing system.
Aztec Conservatory Roof Systems, the
UK PVC/aluminium roof system manufacturer, has developed a dome option
to complement its Linear core system.
Initial
tests indicate the new version can create domed roofs up to 4m diameter,
with arc radius depending on the chosen glazing material. Aztec will supply
bar length already bent to shape, for glazing to be installed (16mm multi-wall
polycarbonate can be cold bent on site, up to 2.7m bend radius on sheet
1700mm wide).
Colin Bennett, Aztec managing director, elaborates, 'Conservatories, particularly
domestic or small commercial, in the UK are inevitably linear in structure.
We see domes, but they are mainly architectural features in commercial
environments.
'Physically there is no reason why we have to build linear conservatories;
the commercial building market is increasingly using domes to make an
architectural or aesthetic statement with a building. Why not give the
smaller commercial and leisure, and domestic, projects the choice to be
different?
'Fabricators can charge a premium for something that we believe will be
no harder to install than our standard system, which itself is already
acknowledged as being perhaps the easiest and quickest in the market to
fabricate and build.'
Aztec claims the new dome will meet the same performance criteria ofits
core range. The company says that standard system is designed in such
a way to cut fabrication and build time by up to 30% on a standard roof,
enabling a pro-rata increase in production capability and profit.
'The Aztec roof uses only 10 core components, and has evolved based on
sound engineering principles, to create roof systems which offer greater
spanning capability and greater flexibility in design and glazing options
than competitive premium quality conservatory roofs, yet with fewer components.
Unlike competitive systems, its unique ridge can accommodate all common
formats of glazing - 16mm, 25, and 35mm.' adds Colin.
'lndependent tests showed the Aztec system will withstand the worst weather
experienced in the UK, with wind loadings of up to 2000 pascals. Its design
also means it is proven to be more weather resistant than alternative
systems, with minimal risk of rain penetration.'
Tel: 01942 720044
Email: mailto:enquiries@aztecsystems.co.uk
Web: http://www.aztecsystems.co.uk
Fitter
Friendly KAT Packs Ease Patio Door Installation & Glazing
Specialist
patio door manufacturer KAT UK has
developed glazing and installation kits to make the fitting of KAT patio
doors quicker, easier and more cost effective. Additionally, the company
says, the final fitting is more secure and sturdy.
Each Installation pack contains 16 KAT Rapier screws designed specifically
for KAT patio doors. The screws, manufactured from C10 22 superior grade
carbon steel, can be drilled directly into the structure of the building,
eliminating the need for plastic sleeve anchors. KAT Rapier screws have
also been designed with a 25° sharp point which means it can be sunk
into all wood types without the need to pre-drill, and a 45°
deep single thread providing exceptional holding power and pull out resistance.
Zinc coated to withstand the 240 hours salt spray corrosion resistance
test,
the KAT Rapier screws have also been treated with a dry wax seal to ensure
a faster insertion and further corrosion resistance.
The KAT Glazing packs contain enough packers to glaze the sashes of the
patio doors and to pack out the outer frame.
Email: mailto:sales@katuk.co.uk
Web: http://www.katuk.co.uk
Promac
Launches new Urban SV430
Promac
Window Machinery
has recently launched the Urban SV430 fully Automatic Corner Cleaning
Machine. Designed specifically for the UK market, the new SV430 features
external profile alignment, a clamping system and an easily programmable
CNC axis controller. An efficient arrangement oftooling means that the
SV430 operates at very high processing speeds, delivering cost effective,
volume production.
The Urban machine is equipped as standard with a user-friendly PC control
which facilitates integration into automated production lines and combines
well with other production machinery. Designed to produce consistent,
high quality frame cleaning with minimal operator involvement, the SV430
is particularly effective when used in conjunction with the Urban WT430
Automatic Turning Station.
Promac can offer the SV430 as a stand-alone comer cleaner, equipped to
mate up to a tuming station at a later date.
Tel: 01788 577577
Email: mailto:saleswin@promac.co.uk
Web: http://www.promac.co.uk
Greater
Glass Protection from Ritec
Ritec
has now introduced ClearShield Glass Protect – a new improved formulation
that offers greater surface protection for all types of glass from the
damage caused by weathering and contamination.
Following
on from the introduction last year of Sandblast Glass Protect, ClearShield
Glass Protect is based on the company’s proven polymer technology
enhanced with a new and more active catalyst. It ensures higher resistance
to corrosion and staining for easier cleaning without the need for harsh
chemicals.
ClearShield Glass Protect provides a good solution for all kinds of exterior
and interior glazing, including architectural glass, residential windows
and doors and also conservatory roofs, a growing market for Ritec’s
customer base. It can be applied in the factory or on site using either
manual or fully automatic spraying equipment as part of Ritec’s award-winning
ClearShield System.
‘The development of ClearShield Glass Protect further improves the
performance of our ClearShield System which converts high maintenance
unprotected glass into Low-M (Low Maintenance) Glass,’ comments Serge
Perkoff, Ritec’s International Sales & Marketing Manager.
The customer support package from Ritec includes full training, plus on-going
marketing and technical support.
Sandblast Glass Protect is a specialist version of the Ritec technology
developed for sandblasted glass or glass with abrasively-etched decoration,
which is especially vulnerable to staining, to help it to retain its original
appeal.
Tel: 020 8344 8210
Web: http://www.ritec.co.uk
With
its clean lines and reflective qualities, the popularity of glass for
interior fit-out design features such as balustrades continues to grow.
Float Glass Industries (FGI) has
a wealth of expertise in the supply of quality processed and toughened
safety glass to the latest ISO 9001:2000 manufacturing standard for this
type of specialist application.
In
addition to commercial and retail applications, glass is specified increasingly
for balustrading in residential environments, like Connect House, a major
refurbishment development in Manchester by Artisan Holdings combining
luxury apartments with high-tech office space. FGI was appointed by Retro
Future, Artisan’s construction division, as the main supplier of
glass for key design elements, including spectacular balustrades for the
impressive communal areas. FGI’s experienced team also advised on
technical aspects of the glass specification relating to relevant building
regulations and safety standards.
From its new state-of-the-art facility in Manchester FGI can satisfy virtually
all design requirements, including cutting, drilling, notching, complex
shaping and toughening, and can handle glass sizes up to a maximum of
3800 x 2400mm. Following recent investment FGI now operates three toughening
lines and uses the latest automated precision cutting equipment, for rapid
turnaround on every order, including large sizes and high volume.
Contact: Dawn Offland
Tel: 0161 946 8000
Web: http://
www.floatglass.co.uk
Venture
Tape VG100 Products Benefit Manufacturers
Venture
Tape
claims that its VG100 Series Security Glazing Tapes have been shown to
increase throughput and reduce rework at window manufacturers. VG100 has
a differentially coated adhesive system which allows manufacturers to
stock window sub-assemblies for longer durations without the tape peeling
away from the frame, increasing production flexibility and output. In
addition to application performance, Venture VG100 series products also
conform to BS 7950 Manual Glazing Test.
Venture VG100 is a 100% closed cell polyolefin foam tape with a glass-bonding
adhesive on the liner side and a versatile adhesive on the application
side which bonds equally well to PVCu, aluminum, and wood sashes. Venture
VG100 series also has the added advantage of being supplied with a red
filmic release liner which, unlike paper, does not tear on removal.
Venture VG100 series is stocked in Daventry and is available in a variety
of thicknesses and widths. Please visit http://www.venturetape.com
for product specifications, applications information, and standard roll
sizes, or call 01327 876555 for a free sample.
Sentinel
Introduces New 'Narrowline' Door Style
In
response to demand from a number of RSL and local authority customers,
Sentinel Doors has added a new Series
750 'narrowline' composite door to its range. It is offered as a high-performance,
low-maintenance alternative for accommodation such as 'Airey' houses,
which have very narrow apertures.
The narrower Series 750 door has been achieved by reducing the size of
the centre mullion, producing a door leaf of between 872mm and 915mm wide.
The narrowline door is available in a smooth white finish to match the
company's existing Series 100 and is available in three styles - 750,
751 and 753.
The Series 750 is manufactured using Duradev - a multi-layer co-extruded
sheet material consisting of layers of standard ABS with a top layer of
matt acrylic - and can be finished using Sentinel's Twinseal or Flushfit
systems.
Commenting on the introduction of the new door style, Sentinel's sales
and marketing director Phil Mundell says: 'The 750 has already produced
a lot of interest from existing customers, with the first batch being
delivered to Leicester City.'
With the use of a correct hardware specification the Series 750 door conforms
to the standards required by Secure by Design and has been independently
tested to PAS 023 and PAS 024.
Tel: 01443 229219
Customers
of patio door specialist Sliders UK
can forget bump stops, thanks to the company’s latest development
– a built-in patio door stop. ‘Door stops are best fitted on
site once the patio is in position and level,’ explained Sliders’
director Mike Spain, ‘but the number of instances where stops and
ancillaries are thrown away with the packaging made us investigate an
alternative.’
The solution, part of a number of product enhancing initiatives according
to Mike, provides ‘improved aesthetics and performance, one less
finishing job for the installer, and a lot less hassle all round!’
Since Sliders UK was formed in November 2002 it says its high quality
bevelled and fully featured products, aggressive pricing and reliable
short lead times have proven a huge success with customers across the
UK.
Tel: 01772 698222
Web: http://www.sliders-uk.com
Conservatory
roof manufacturer, K2, is looking
forward to a colourful Spring with the launch of blue/white products across
the extensive product range.
The move is part of K2’s ongoing expansion programme and follows
feedback from both fabricators and installers requesting the new additional
colour. The blue/white product was launched on 1st March.
Comments Managing Director of K2, Sally Fielding: ‘We already had
plans to step up our manufacturing output and raised the idea of adding
a blue/white option with fabricators and installers. The response was
so positive that we decided to implement these plans and were in a position
to deliver product at the launch.
‘This is the latest product development initiative aimed at widening
the choice available to our customers and enabling them to better address
demand. K2’s in-house manufacturing capabilities will allow the company
to produce blue/white extruded product that exactly matches corresponding
blue/white crests, finials and other injection mouldings.’
Sally Fielding continues: ‘We were determined that we would not launch
a blue/white product unless we could be certain that we could avoid the
colour matching issues that have historically been a problem in the industry.
Customer service and excellent product performance are fundamental to
our approach to the market and we are delighted to be offering complete
customer confidence with our new blue/white product.’
Web:
http://www.k2conservatories.com
aluplast
UK – Improving Both the Fabricator’s and Installers Lot; a Lot
PVCu
window and door system supplier Plus Plan,
a division of aluplast (UK) Ltd, has
recently launched several new product developments aimed to help both
the fabricator and installer with particular windows and doors –
at the same time as making them more attractive to homeowners and specifiers
alike.
New decorative bay window assembly and standard coupling profiles were
developed not just to provide aesthetic and sculptured options for the
homeowner, but a simple and secure ‘clip-on’ installation –
whilst at the same time readily satisfying appropriate building and window
performance requirements. The bay and coupling systems are compatible
to both 60 and 70mm profile suites and available in several finishes.
To further help satisfy Building Regulations, particularly when complying
with the 15mm disabled access requirement – aluplast UK has launched
a new 60mm door threshold that incorporates locating groves to simply
fit wheel chair ramps to reduce access heights to acceptable levels. This
complements an existing 70mm version.
Horned sash end caps for the Durham 70mm casement window system are the
latest additions to the Plus Plan range in the UK that will see considerable
extension during 2004 – including the introduction of complete new
70mm and 60mm window and door profile suites.
Contact: David Gurney
Tel: 01455 555316
RegaLead
says that its recently launched fused glass system opens up a whole new
world of possibilities for decorative glass. The range consists of three
distinct collections of fused glass tiles – Fusion, Vetro and DG
– which can be bonded to glass to create stunning decorative effects
for applications such as door panels, glazed partitions and furniture.
RegaLead’s
Fusion range features just 13 glass types for easy mixing and matching
of tile styles in co-ordinating colourways. The tiles are manufactured
from top quality Spectrum Glass to ensure consistency of colour, clarity
and repeatability. Each tile is made from 3mm clear glass cut to shape
and then heat fused with a 3mm tile of coloured glass. RegaLead’s
simple and cost-effective Fusion system brings a new look to glazing in
doors and conservatory toplights, for example, and is particularly attractive
when used in conjunction with Sandblast / Etched glass or Brilliant Cutting.
RegaLead reports that several major door manufacturers have already agreed
to offer the Fusion range, ‘An increasing number of companies are
looking for differentiation and to meet the growing demand for a more
exciting choice of glazing designs. Our new Fusion system delivers on
both these requirements and has been very well received by the industry,’
explains Guy Hubble, Sales & Marketing Director. Alongside Fusion’s
standard options RegaLead is also able to create bespoke designs for door
panel companies at its Manchester production facility, subject to volume.
The new fused glass collection from RegaLead also includes the Vetro Suit
manufactured in Italy using the famous Venetian Murano glass. This highly
decorative range offers 80 complex designs and is ideal for a variety
of interior design applications. A contemporary selection of tiles from
Russia is also available for decorative glass specified for residential
environments and commercial applications.
Fused glass has become increasingly popular across Europe and is now finding
its way into the UK window and door market. Achieving consistent results
during manufacture of this specialist glass can be difficult, ‘However,
with our unique range of pre-fused glass tiles this attractive new style
of glass is now easily accessible for a wide range of applications,’
continues Guy.
RegaLead’s fused glass range can be supplied ex-stock for next day
delivery. A brochure with full details of each collection together with
ideas for designs and applications is now available. For a free copy call
0161 946 1164 or
email mailto:sales@regalead.co.uk
Hewi
CombiSystem can be supplied as a complete handle or in the form of individual
components as required.
The CombiSystem principle – the various components are solidly interlinked
using a patented system.
Assembly and dismantling can be carried out without difficulty. The stainless
steel tubes can be cut to size directly on site.
Web: http://www.hewi.de
The
New Marvin Clad Ultimate Insert Sliding Sash Replacement Window
Marvin
Architectural
is the authorised distributor of Marvin Windows and Doors in the UK and
Ireland, and has over 10 years experience in installing fine quality wood
and composite windows and doors. Marvin says it has always offered high
quality and high performing windows and doors, and that through constant
development the company is now able to introduce a highly versatile and
cost-effective window replacement solution. The Clad Ultimate Insert Sliding
Sash blends old world style craftsmanship with modern day technology,
resulting in a high performance, energy efficient and low maintenance
window.
If the frame on your existing sliding sash is still in good condition,
there is no need to buy and replace the whole window. Marvin's new Clad
Ultimate Insert Sliding Sash offers the solution. Its frame is sized to
fit into an existing window frame without disrupting interior trim or
exterior masonary finishes so that replacing windows becomes a simple
and hassle free experience for homeowners.
The wood interior has a classic and timeless appeal. The exterior features
a heavy, durable extruded aluminium cladding that is profiled to give
the appearance of wood joinery, but offers low maintenance benefits. The
cladding is available in 5 standard 'Kynar' finishes and many more select
and custom colour options. The 'Kynar' finish exceeds the industry's toughest
performance specification - helping to eliminate dents, mars and scratches.
The result is windows and doors that retain their colour with virtually
no fading or chalking for years to come.
Homeowners can expect reliable, energy saving performance from Marvin's
Clad Ultimate Insert Sliding Sash. All sizes have a high Design Pressure
rating, offering protection against air and water infiltration and dependable
structural performance (independently UK tested). The standard glazing
offered is Marvin's Low E II insulating glass with Argon Gas, offering
U values which significantly reduces a home's heating and cooling costs.The
Clad Ultimate Insert Sliding Sash's made-to-order sizing ensures the unit
stays square and true and the two customised sill options are available
as standard to also help achieve a superior fit.
There are several other features and benefits available as standard on
the Clad Ultimate Insert Sliding Sash such as:
* Patented sash tracking and locking system, coupled with a block and
tackle balance mechanism to ensure the window opens and closes over time
across seasons, with finger tip ease.
* The cleverly concealed tilt lever that offers easy access to exterior
sash for cleaning.
* Integral full sized screen that does not need to be removed when tilting
upper and lower sash.
As well as these standard options, there are also several optional product
accessories available for the Clad Ultimate Insert Sliding Sash including
- sash lifts, aluminium surround half screens, glazing bars, single hung
units and factory mulling. The Clad Ultimate Insert Sliding Sash is available
as an operator, picture or transom style window.
Tel: 0208 569 8222
Email: mailto:sales@marvinuk.com
Web: http://www.marvin-architectural.com
New
Profile Range Makes Light Work of Levelling
Profile
is a new brand of levelling and surveying instruments, introduced by Pentax
UK Ltd. Developed to meet an ever increasing demand for high
performance at low cost, Profile makes state-of-the-art technology affordable
to professionals in building and construction.
‘Manufactured to high specifications, Profile products combine uncompromising
standards of design, quality, precision and reliability with outstanding
value for money, right across the range.’ says the company.
Spearheading the new line-up is the Profile PLP-180 and PLP-190 Series
of Automatic self-levelling Lasers that offer easy access to all the benefits
of modern laser technology. Highly accurate, versatile and easily portable,
the Profile PLP Series is fully equipped to meet every site levelling
requirement, both indoors and out. With leading edge electronics and rugged
construction to ensure years of dependable operation in the toughest conditions.
Ease of operation is a key factor in the design of all Profile instruments
and the PLP Series is no exception. All models are simple and intuitive
to use and require no special training or technical expertise to achieve
reliable results under all conditions.
In addition to the PLP-180 and PLP-190, three other models have also been
announced. The Profile PLP-140 is a visible split-beam manual Laser with
single button operation for one-man use.
The Profile PTH-10 Electronic Theodolite; lightweight, accurate and quality
built for construction site use. Plus the Profile AL-26 Automatic Level
with 26x magnification and magnetically damped compensator, designed for
use in general building and construction, landscaping, agricultural and
civil engineering.
One of the major points of difference offered by the Profile brand is
the high level of service provided through the UK distributor Pentax U.K.
Limited. One of the world’s leading innovators in electro-optical
technology, Pentax is dedicated to maintaining exceptional standards of
customer care and support. Every Profile instrument is covered by a comprehensive
2 year warranty, with maintenance and repairs carried out by factory-trained
technicians at the Company’s headquarters in Slough.
Tel: 01753 792711
Email: mailto:info@survey.pentax.co.uk