Weatherproofing
in Double Quick Time with Conservaflash™
Ultraframe, the designer and manufacturer of conservatory systems, has
launched a new pre-formed PVC flashing system.
The
new system, which claims to save at least an hour on most conservatory
installations, provides an engineered solution to the often complex problem
of conservatory flashing. Conservaflash™ offers a pre-packed solution
to the installer, without any of the environmental risks of traditional
lead flashing. In addition, because the new flashing comes preconfigured
with the roof, separate lead cutting, sourcing and waste is obviated.
The system also includes a pre-formed soaker that's pre-clipped into the
starter bar and fits behind the flashing.
Twin weatherbar grooves act as a primary weatherseal and locator for silicone,
while on the front face capillary grooves prevent ingress of wind driven
moisture. Thanks to a 93-degree angle the flashing is physically restrained
into the chase and ensures integral mechanical retention in tandem with
the wedge clips on the top edge and the wedge ribs on the underside. This
means that Conservaflash™ will always be held firmly in place during
back pointing.
Profiled corners, radiused to the largest angle grinder, eliminates the
need to 'over cut' the mortar joint, saving time during installation.
The system is suitable for the majority of Victorian, P-shape, lean-to
and Ultralite 5000 PVC conservatories.
Tel: 01200 452375
Email: mailto:sales@ultraframe.co.uk
Web: http://www.ultraframe.co.uk
Vitawin-Reth
UK Ltd - Espagnolette Handles
Reth UK recently introduced its Vitawin range of espagnolette handles
in locking and non-locking versions for compliance with the new building
regulations.
Vitawin's push to release key locking espagnolette handles claim to give
smooth operation of the window locking system and the handles are manufactured
in quality die cast zinc alloy. 'This means assured operational ability,
gives strength, endurance, durability and reliability to the functionality
ofthe sash.' says the company.
The powder coating and electro-coating finishes are available in white,
gold, black and polished chrome finishes available in 10,20,30 and 40mm
spindle lengths as standard. The handles are manufactured in inline and
cranked versions.
Vitawin also offer a custom design service to manufacture a handle of
the customer's own design.
All stocks are available from the company's UK warehouse facility delivered
within 24 hours as standard.
Tel: 01623-439382
Hollow
Soffit from Plaslyne
Plaslyne,
the building products distributor, has added new colours to its range
of hollow soffit board. Mid brown was added earlier this year and black
is currently under trial.
The company claims to be the biggest supplier of hollow soffit in the
UK market with the largest range of matching trims and accessories in
the business.
'A tried, proven and accepted product, the soffit doesn't shatter or split
in cold conditions and is perfectly suited to the unpredictable nature
of the British climate.' says Plaslyne General Manager, David Drew.
'Our hollow soffit is a well-known brand and trusted by installers whom,
we find, are reluctant to move to alternatives.'
The hollow soffit is part of Plaslyne's collection of roofline products.
It is available in 100mm and 300mm widths in up to seven colours, including
Rosewood in the 300mm size.
Plaslyne offers a full range of plastic and cellular building products,
from roofline applications and window ancillaries to decorative cladding,
through a national network of approved stockists and distributors.
Tel:01242 243444
New
Fibreglass Products from Therma-Tru
David
Pursey, Therma-Tru's UK Sales Manager comments, 'A major 65 million dollar
investment in our factory sites within the USA has now enabled Therma-Tru
to extend its fibreglass range. The impact of this massive investment
has already been seen in the UK, with new products being introduced for
the UK Housebuilder, Architect and Specifier. In 2001 great progress was
made into the British market, including improved product lines and a bigger
distribution network for our products. With our new product lines, Therma-Tru
now have the widest range of fibreglass exterior doors on the market and
with doors at all price points for every type of home, the variety of
doors on offer in the UK is impressive.'
Therma-Tru has introduced its Classic-Craft, Smooth-Star and Fiber-Classic
ranges. The premium Classic-Craft combines the looks of traditional oak
with state ofthe art technology. This range - alongside Smooth-Star which
has already made an impact in the UK market - will provide builders with
a suitable alternative to steel and PVCu.
A new addition to the fibreglass range has also been launched, the Smooth-Star
30 minute Fire Door - adding a new dimension to this popular. Fiber-Classic,
a favourite in the Public Sector for over 13 years is security tested
to PAS23/24.
Tel: 0117 961 0900
Email: mailto:enquiries@lindman.co.uk
Web: http://www.lindman.co.uk
Hot
Stuff from GBW
GBW's Discovery range of composite doors now includes Fire Doors in a
choice of designs. Featuring a hardwood frame and GRP skin, the new doors
have a 30 minute fire rating and are PAS 2 3/24 accredited.
Available in blue, green, red, white and woodgrain, Discovery Fire Doors
have a textured finish and the 44mm thick door leaf is designed to ensure
a flush fit. There are five variants in the collection including the traditional
non-glazed Nobel and the half-glazed Alfred. Glazed options are supplied
with easy to fit clear 6mm safety wired Pyroshield glazed cassettes. A
comprehensive choice of fully fire rated furniture, including letterboxes
and numbers, can also be supplied to complement the doors.
Suitable for local authority and housing association applications, GBW's
Discovery Fire Doors have an optional low threshold for easy access and
meet current mobility regulations. Security is assured with either mortice
or multi-point locking as required.
'Since the launch of our highly successful Discovery door, GBW has become
one of the leading suppliers of composite doors for social housing projects.
This latest addition to the range reflects our continuing commitment to
meeting the stringent requirements of public sector specifiers' comments
Geoff Foster, GBW's Director of Sales.
Tel: 08705 388377
James
Harcourt Offers Exterior Doors
James
Harcourt, the new, national brand of PVCu windows, doors and conservatories
from Bowater Windows and WHS Halo, is offering its Approved Installers
an exclusive range of composite exterior doors.
Manufactured using the latest polymer technologies to combine durability
with aesthetics, James Harcourt composite doors feature a natural wood
grain finish and high definition wood mouldings to create the character
of solid hardwood.Unlike the majority of composite doors, the natural
grain finish contained within the leaf is deep enough to allow a degree
of sanding to remove light scratches.
At the heart of each door is a patented, high-density foam core, surrounded
by a laminated timber sub-frame.The reinforced door surface is formed
and bonded to the core in a 'one step' moulding process.
'This process increases skin toughness and ensures that James Harcourt
composite doors do not suffer from de-lamination, whereby the skin of
the door separates from the inner foam. Plus it ensures there are no voids
within the composite or any bubbles, which give the door a high level
of dimensional stability. The core density of the composite doors, together
with the surfaces, is equal to traditional wood density, making them highly
durable. 'In addition, James Harcourt composite doors are low maintenance
and offer excellent weather protection and resistance to fire. In the
correct specification the doors will easily meet the 'Secured by Design'
standard recommended by many Crime Prevention Officers and insurance companies.'
says the company.
The James Harcourt composite door range offers three standard options
- Georgian panelled door with glazed fanlight, Victorian glazed door and
Edwardian glazed door, all of which feature an engineered glazing solution
and are available on a guaranteed 'fast track' delivery turnaround.
For added security, multi-point locks and security door chains are available,
plus bespoke items such as handles, letterplates, numerals, knockers and
'spyglass' viewers, can be fitted to meet end users' specific requirements.
For further information on the James Harcourt Approved Installer Scheme
contact 0870 241 6337.
First
for Finishes at Evergreen Door
Evergreen Door has launched an extensive range of finishing options for
both steel and fibreglass doors in response to rising demand from customers.
New finishes have been developed to complement other home improvement
products, such as PVCu window profiles and garage doors.
Foiled products are being developed to match woodgrain PVCu window profiles,
while a grained finish has been introduced to replicate the look of traditional
garage door
finishes.
Other classic paint finishes, including red, blue, green and white, are
in the pipeline, in addition to 'wipe on' wood stain effects in Mahogany,
Teak, Light Oak and Walnut.
Managing Director Robert Benn adds: 'Customers have always appreciated
the low maintenance, high performance benefits of our steel and fibreglass
composite doors.
Now our doors can be finished to complement other home improvement products
that may have been installed, creating a co-ordinated look across the
home.'
Contact: Kathy Wiikinson
Tel: 01242 243444
Janex
Launches Tenth Anniversary Range of Doors
Janex,
the UK supplier of Scandinavian windows and doors, will be launching three
new styles of its successful brand, Janexdoor, to celebrate the company's
tenth year in business.
The doors, which have been put through rigorous testing by TRADA, have
passed with flying colours to be accredited with PAS 023 and PAS 024 -
which test the performance and security of the door.
One of the criteria for testing the performance of the door assembly to
PAS 023, is to open, close and lock the door at least 50,000 times - this
is equivalent to a door being opened and closed 13 times a day for ten
years. The Janexdoor was opened, closed and locked 176,000 times without
performance failure.
PAS 024, which tests the enhanced security performance requirements of
the door, also had several criteria for testing, one of which was to apply
forces with a hydraulic ram to the locking points and the hinges. To pass
this test the doorset has to withstand forces equivalent to loading a
weight of 450kg to each locking point - the hinge withstood 1,150kg and
the locking point 770kg.
Vincent Kerrigan, Deputy Test Manager at TRADA Chiltern, said: 'Janex
products have been successfully tested by TRADA's testing division, Chiltern
Dynamics, for security, durability and weather-tightness, and continually
demonstrated the highest performance levels tested in TRADA's laboratories.
'ln addition, Chiltern Dynamics is continuing to test Janex products to
explore the limits of their performance as part of Janex's on-going research
and development.'
Alex Brown, managing director of Janex Group said: 'The products are ideal
for Social Housing, Local Authorities and Housing Associations - new build
and refurbishment projects. For example, Janex has been supplying window
and doors for several of Home Housing's projects in Newcastle and for
the past five years to Easthall Housing Association for a regeneration
project in Easterhouse, Glasgow.'
Janex was founded ten years ago by Norwegian Jan Skaara, as a supplier
partnership in Scotland. Jan recognised an important market in the UK
for high quality, high performance Scandinavian timber windows and doors.
He initially set his sights on Scotland, where the weather conditions
can be similar, but not as extreme as the harsh Scandinavian climate.
The company expanded into England and bought over Swedoor UK three years
ago. The company has enjoyed remarkable growth following a real demand
for Scandinavian building products and was recently recognised as a Gazelle
company by leading business newspaper Business am.
Tel: 01324 878700
Technal
Launches FXi65 Window Range
Technal has expanded its FXi suite of commercial aluminium windows with
the addition of a 65mm module designed to give specifiers more choice
and flexibility to meet the requirements of Part L of the new Building
Regulations.
The
FXi65 window incorporates a 19mm flush polyamide thermal break and innovative
gasket detailing to offer enhanced thermal performance. FXi is Technal's
most technically advanced window suite to date and will help deliver finished
buildings, which heat up more quickly, stay warmer longer and cost less
to run.
The design of the 65mm system accommodates 17mm up to 48mm double glazed
units, and allows more economical glass specifications to be used whilst
still delivering the required U-value of 2.2W/mK, even with a glass centre
pane U-value as high as 1.9W/mK. The launch of the new module means that
with the right combination of frame and glazing, the requirements outlined
in Part L can be met across Technal's FXi suite.
In tests to the new, more stringent BS EN standards, the company claims
FXi65 met and in some cases exceeded the requirements. The system achieved
the highest classification for air permeability, A*4, in tests up to 600
Pa; it was fully watertight up to 1200 Pa and was rated up to V*C5 for
wind resistance which equates to a pressure of 2000 Pa.
To simplify specification, stock-holding and fabrication, FXi65 shares
many common accessories with the FXi46 and FXi52 ranges. It also only
requires one additional punch tool.
As with the other systems in the FXi suite, FXi65 can be supplied in a
full range of configurations to suit most situations, both new build and
refurbishment. These include fixed lights, projecting top and side hung,
bottom hung, and tilt/turn.
In addition to the wide choice of polyester powder coated or Anolok finishes,
FXi65 is also available in Technal's exclusive palette of striking flecked
gloss CendrÈ colours.
For further information on the FXi suite, including the new 65mm module,
and other high performance facade systems in the Technal range, visit
http://www.technal.co.uk
Tel: 0113 296 1400
Reflectiv
Launches Ambience-Creating Colour Films
Reflectiv
is launching a range of coloured films for windows. These films are transparent,
which allows them to create a tinted atmosphere without masking the view.
The range of Reflectiv films offers the magic of colour by instantly transforming
existing windows without the need to replace them.
Producing an attractive ambience, the colour films can change the atmosphere
of a space as required and brighten it up by personalising it.
Schools, gymnasiums, hospitals, public places can now take on new look
by using this glass film on facades, glazed partitions and other windows.
Reflectiv films have already been used in prestigious locations such as
the French Ministry of Social Affairs, the Pernod-Ricard head office,
and the Guggenheim Museum in Bilbao.
Tel: (33) 01 43 99 00 22
Web: http://www.reflectiv.com
Union
- New Ranges of Door furniture
Union has introduced three distinct levels of lever handle furniture,
each offering specific features and benefits to provide flexibility for
a wide range of commercial developments.
For
specification applications requiring style and individuality, the top
of the range Union Artefact 3000 Series is available in 15 contemporary
lever styles in a choice of polished stainless steel, satin stainless
steel, polished chrome, powder coated or brass. They are supplied as standard
on round rose furniture. However, a feature of this range is that Specifiers
and clients have the option of designing their own backplates to a specific
shape that complements the chosen design throughout a building. Complete
with 'G25', which is a 25 year Union guarantee, the Union Artefact 3000
Series is compatible with the commercial range of mortice locks within
the Union range. However, if a higher lever of security is required, the
Union heavy duty architectural range of 2D2 mortice locks are recommended.
The Union 2000 Series range is made from solid 316 grade stainless steel
and is the medium range of door furniture being introduced by Union. Offering
11 individual lever styles, they are suitable for most specification applications,
providing quality and durability.
When a lighter weight lever handle is required, the Union 1000 Series
range is a suitable choice. With a selection of 19 lever styles, the Series
1000 is made out of tubular 316 grade stainless steel. Both the Series
2000 and 1000 ranges have a 10 year guarantee and are available in polished
or satin stainless steel finishes.
Tel: 01902 366911
Email: mailto:union@locksinfo.co.uk
Web: http://www.unionlocks.co.uk
BAY
WATCH WITH PROFILE 22
PROFILE 22 has devised a clever solution to the frustrations of fitting
fixed angle bay windows. Two fixed bay adaptors of 135 degrees (Part No
2251) and 150 degrees (Part No 2252) now enhance the range and offer more
choice to customers.
Both
sizes are designed specifically for use with PROFlLE 22's thermally efficient
70mm Fully lntegrated System. The clip-on sections also integrate with
trims used on the 60mm fixed bay couplers.
These new products are part of a complementary trio of bay window products
which also comprise a new 70mm variable-angled Bay Saddle.
This new non load-bearing profile (PartNo 7769) has been developed in
Jine with customers' requirements and is ideal for variable-angled bay
windows.
Product Manager, Nic Rossano, comments: "The existing 70mm Bay Saddle
will now become specific to load-bearing bay applications and can be used
with both the 60mm and 70mm systems.
"These additions to our range now offer a 60mm non load-bearing adaptor,
a new 70 mm non load-bearing adaptor and a generic load-bearing bay adaptor
(Part No 7768) that suits both systems," adds Nic Rossano.
Briwax
Professional Repair Range
Briwax Professional is a selection of specially developed woodgrain and
colour touch-up and repair products for the furniture, kitchen and window
manufacturing industries - and is also ideal for installers, repairers
and retailers.
It is suitable for repairs to solid wood, veneers, painted surfaces and
foils with a special range of products for PVCu - including 10 different
shades of white. Anything from fine scratches to badly damaged corners
which need rebuilding can be restored to factory standards
The waxes and pens all include an extensive range of standard colours
with further special and fashion colours available to order. One-off customised
colours can also be supplied on request.
There are three different Professional Repair Kits which include a selection
of standard or customised key products. A range of accessories and tools
complement the waxes and pens and ensure a top quality repair every time.
Training:
Available throughout the year, the training seminars provide a broad introduction
to repairs on all types of surfaces including solid wood, veneers, painted
finishes and foils and PVCu.
There are step by step guides and the opportunity to practice repairs,
touch-up procedures and colour matching.
Located at the company's new Tamworth training centre, there are two types
of seminar - PVCu and Furniture. Both courses run from 09.00 to 16.30hrs
and cost £100 for the first person and £75 for each additional
attendee. A light lunch is included.
Tel: 0845 601 2905
Email: mailto:sales@bollom.com
Web: http://www.bollom.
com/briwaxprofessional
Training seminars: contact Thereasa Ball
Tel: 01827 50634
Email: mailto:thereasa@bollom.com
demista
and Cosyfloor
'The original demista heated mirror pads ensure that bathroom mirrors
remain steam free. They have been selected for new home building projects
by companies such as Berkeley Homes - UK, Laing Homes-UK, and many others
as well as leading hotel groups worldwide.' says the company
'The pads are easy to install, inexpensive to run at just Ip for 32 hours
and offer a simple way to keep bathroom mirrors free of condensation.
They are approved to intemational standards, are maintenance free and
have a 5 year warranty.'
Cosyfloor underfloor comfort heating can be installed on any solid based
level floor and is suitable for gently warming cold surfaces such as tiles,
marble, natural stone and hardwood.
Particularly suitable for bathrooms, kitchens and conservatories, Cosyfloor
cable mats are easy to fit under timber, laminates, tiles, slate, marble,
vinyl and carpet.
The thin, double insulated cables are attached to a reinforced open weave
mat and can be laid around fixed objects, such as baths, basins and kitchen
appliances making it adaptable for most areas. They are also available
in a range of cable kits complete with electronic floor sensing thermostat.
Tel: 01932 866600
Email: mailto:rd@demista.co.uk
Web: http://www.demista.co.uk
Balcas
Launches Easyfix System To Slash Windowboard Fixing Costs
Balcas Kildare - the independent manufacturer of primed MDF mouldings
for the architectural and housebuilding sectors has launched a patented
windowboard fixing system that claims to reduce typical installation times.
'The Balcas Easyfix system is an invisible fixing system which allows
the windowboard to be fixed in minutes thereby offering significant on-site
labour cost savings. As well as offering speed and simplicity of installation,
use of the Balcas Easyfix system is easily adjustable to suit different
construction types and also eliminates the possibility of damage to the
surface of the windowboard common with traditional fixing methods.' says
the company.
Balcas estimates that use of the Easyfix windowboard system will allow
the 16 different windowboards found in a typical four bedroom detached
house to be fixed in up to 75% less time than traditional methods while
also eliminating the need for filling, an undercoat, and sanding down.
The Balcas Easyfix system is based on a robust metal fixing with a shaped
lug. The fixing's lug then fits securely into a precut groove in the underside
of the Balcas windowboard. The fixing should then be rotated by hand through
90% into position. Finally the fixing is screw-fixed to the substrate
where it will remain hidden while firmly securing the windowboard in place.
Balcas has also announced that it is shortly to launch a version of the
Easyfix system which can be used for internal door frames, again with
the advantage of easy fixing and adjustability.
In addition to windowboards, the Balcas range of primed, moisture-resistant
MDF internal mouldings currently includes skirtings, dado rails and architraves
all of which claim to set new standards for ease of working and quality
of finish. Other products available from Balcas include the Fable door
lining system and the Balcas Wall and Stair Panelling system.
Tel: 00353-45-877671
Tel: 02866-326797 (UK number)
Email: mailto:sales@balcaskildare.com.
Web: http://www.balcaskildare.com
Howarth
Timber Presents New Hinge Packer
Howarth Timber has produced an easy solution to the problems caused by
the natural expansion and shrinkage of timber doors. The company's new
hinge packer is designed to slot in between the door and hinge, and is
easy to remove and replace during periods of moisture movement.
The swelling of the timber can not only lead to the door sticking, but
to the binding of locks which work on a tight tolerance. The hinge packer
can be slotted in and out of place straightforwardly by simply loosening
off the hinge screws, without the need to remove the door from its frame.
The hinge packer is now fitted as standard to every timber door leaving
Howarth Windows and Doors' factory, with the locking mechanisms set to
the optimum, since at this point the doors will be as dry as at any time
in their future life. When the doors swell due to moisture ingress, the
packer can be removed, and should the door shrink again in the summer
months, it can be refitted.
The full Howarth door range is detailed in the latest edition of the company's
brochure, which also features Howarth's Hi Spec windows, sliding sash
windows and conservatories.
Howarth Windows and Doors is a division of the Howarth Timber Group, which
has been established for over 160 years. The group provides services including
timber importing, timber engineering and merchanting across the UK.
Tel: 01422 376012
New
Software for the Construction Industry Scheme (CIS)
JNC Solutions has launched a new software addition to heip construction
companies simplify their CIS Tax payments and returns to the Inland Revenue.
CIS TAX 50 is a software solution to provide total and easy control of
the legislative requirements of CIS. This provides a simple to use solution
which has been released as a stand alone module of CIS Manager 50 which
extends the solution for contract management and job costing.
CIS Manager 50 and CIS Tax 50 fill a gap in the market by adding an industry
specific solution to Sage Line 50 to meet the requirements of the construction
industry. Until now construction companies have had to choose between
expensive industry solutions often with limited accounting capability
or a standard accounts product not ideally suited to the Industry business
practices. The combined capabilities of Sage Line 50 and CIS Manager 50
provide solutions in each area with seamless integration and at a lower
cost.
The software provides the following capabilities:
CIS Tax 50
Subcontractor payments and retentions.
CIS Tax automatically calculated
Vouchers produced each month with a single click
Seamless integration with Sage Line 50
CIS MANAGER 50
As above plus:
Job Costing and Applications for payment
Subcontract costs already entered in CIS TAX 50
Profit to date on each job
Variations and Dayworks
Contact: NigelWhalley
Tel: 0121 452 1713
Email: mailto:sales@jnc-uk.com
Web: http://www.jnc-uk.com